Delicious Tuning ECUTEK BLUETOOTH PROGRAMMING KIT

Delicious Tuning ECUTEK BLUETOOTH PROGRAMMING KIT

  • $375.00


PN: DT_ECU_CONNECT_PE

EcuTek ECU Connect is a free app for iPhone/iPad and Android devices that integrates with EcuTek new Bluetooth vehicle interface to offer you advanced features and functionality, plus flashing tunes on to the vehicles ECU.
 

This exciting new product allows tuners and customers to interact with the ECU using their mobile device. It also integrates with the latest EcuTek RaceROM features to provide innovative new functions and even greater control.

To see the ECU Connect features available for each supported vehicle, click the model name on the right-hand panel (under Features)

 

  • Datalogging Display and record factory and RaceROM diagnostic parameters, including engine and transmission simultaneously*
  • High-speed Logging rates up to 50% faster than ProECU and as fast as 200Hz on some vehicles (Nissan 370Z factory protocol)*
  • RaceROM integration Driver interaction with RaceROM features*
  • Performance Analyser Test and share the results online
  • Archive Stores log files and performance test results for sharing with tuners or friends – directly from within the app
  • Read & Clear DTCs Not only the engine ECU, but other modules too, such as for the TCM, ABS etc*
  • ECU Reset Plus clearing of ECU learnt values*
  • ECU Info Provides information about the vehicle concerned
  • Dealer Locator Lists all EcuTek Tuners and Master Tuners around the world; can be refined by vehicle selection

*Does not apply to all cars: check supported models


RACEROM FEATURES

ECU Connect works with the latest RaceROM to integrate your device with new and existing features, including...

  • Custom Datalogging Log numerous RaceROM live data parameters including fuel injection volume, per-cylinder knock, injector angle, G-sensors, wheel-slip ratio and more *
  • Map Switchi​ng Switch between different modes using the app, and create and name each mode using ProECU *
  • Valet Mode Reduce your car’s power output for when someone else is to drive it *
  • Launch Control Adjust the launch RPM using the app *
  • Boost Controller Set the maximum allowed boost pressure for each Map Switch mode

*Check for feature availability by car model


CUSTOM INPUTS

NEW for Custom Maps!

Five new inputs that can be configured and controlled using ECU Connect. Within ProECU these can be set up as a Slider control, a Numerical value or a Switch, and provides the following possibilities...

  • Adjustable Boost set min/max boost with driver-adjustable slider control
  • Adjustable Traction Control use a slider control for live variation of traction control gain
  • Live Adjustments use slider or numerical control to add/remove ignition timing, adjust fuelling, vary cam timing or alter custom map outputs
  • Live Adjustment of the power output, also engage solenoids or relays
  • Valet Mode turn this ON or OFF using your handheld device

*The number of custom input possibilities depends on the car model
 


SPECIAL TOOLS – NISSAN GT-R

ECU Connect offers all users extended functionality on the Nissan GT-R: log the engine and gearbox ECUs simultaneously, adjust the gearbox settings and read and clear the warning history. In addition, it’s possible to recalibrate steering angle and brake pressure sensors, and perform TPMS registration.

  • ECM Reset
  • Idle Learning
  • Clutch Auto Learning & Clutch Adjustments
  • Read and Clear TCM warning history
  • TPMS, Brake & Steering tools
  • ECM and TCM Simultaneous Logging

 


VEHICLES SUPPORTED

ECU Connect supports the generic OBD2 CAN communication protocol available on nearly all vehicles manufactured from 2008, so ECU Connect can be used for OBD PID logging, along with read and clear DTCs for all compliant vehicles around the world. There are many different OBD2 standards and protocols and we are unable to guarantee support for all vehicles, but we have tested on many different vehicles including petrol and diesel models.
This powerful new addition turn ECU Connect into a diagnostic and quality logging tool that can be used on nearly all late vehicles worldwide and not just EcuTek supported vehicles.


COMPATIBILITY

iOS 10.2 or higher required.

The ECU Connect Vehicle Interface has been tested and verified to work with the following devices:

  • iPhone 6s Plus
  • iPhone 6s
  • iPhone 6 Plus
  • iPhone 6
  • iPhone SE
  • iPhone 5s
  • iPhone 5c
  • iPhone 5
  • iPad Pro (9.7in)
  • iPad Pro (12.9in)
  • iPad mini 4
  • iPad Air 2
  • iPad mini 3
  • iPad Air
  • iPad mini 2
  • iPad (4th generation)

Latest devices have not yet been fully tested, but they are expected to work.

Android 5 (Lollipop) or higher required.
The device must have Bluetooth connectivity.

iPhone and iPad are trademarks or Apple Inc.
Android is a trademark of Google Inc.
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.

 

 

Warranty and Disclaimer
All tunes are off the shelf, base tunes and are designed around specifically installed parts and equipment on your vehicle. Due to the variances in vehicles and/or performance parts we can guarantee any performance related aspects that may be assumed or expected by the owner of the vehicle. While these tunes are heavily tested on our in house vehicles and designed to work out of the box as a base tune for your vehicle and we do not offer any warranty on any tunes that are installed. If additional changes are requested we do offer updates, revisions, and/or tweaks to any and all tunes/ maps at standard service rates

 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov.


We Also Recommend